Ultimate Nozzle Wiper V2 – with new cutting jig included!
I’ve created a simple and inexpensive solution to get a perfectly clean nozzle for your Bambu Lab X1C, P1S or P1P printer. It was also remixed and adopted for the Prusa XL printers by others. I have used the ultimate nozzle wiper v1 from the beginning in my print farm, with perfect results when printing a lot of sticky PETG, and now I have improved it further because most of you couldn’t get the correct silicone tube. It is now available directly from Bambu Lab. Just give it a try and let me know in the comments.
Improved version – you can now print it from ABS, ASA, PETG, etc. and it will not break! The correct sized Silicone Tube is now available directly from Bambu Lab, Maker’s Supply – check the purchase link of BOM (Bill of Materials) scroll all the way down. Easy assembly! Watch the Youtube tutorial video.
Silicone tube from Bambu Lab, Maker’s Supply or Amazon: https://amzn.to/3XQpi7W
I may earn a commission on qualifying purchases (at no extra cost to you)
-Inner diameter = 8mm
-Outer diameter = 12mm
-Cut to exact length (use the included jig) = 19mm
-Cut approx. 3mm deep into the cross section, offset by 45 degrees (use the included jig)
-Re-use the screw from the original wiper
Download the Ultimate Nozzle Wiper for free here: https://makerworld.com/en/models/529681
Very Easy Installation: Watch my Youtube tutorial video